ANALISIS PEMAHAMAN CYBERSECURITY DAN SISTEM OTOMASI TERHADAP KESIAPAN KERJA DI INDUSTRI OTOMASI PADA MAHASISWA PROGRAM STUDI PENDIDIKAN VOKASIONAL MEKATRONIKA UNIVERSITAS NEGERI MAKASSAR

Authors

  • Astryd Dwi Apriliani Universitas Negeri Makassar
  • Muh Ma’ruf Idris Universitas Negeri Makassar
  • Edy Sabara Universitas Negeri Makassar

DOI:

https://doi.org/10.23969/jp.v11i03.61245

Keywords:

Cybersecurity, Automation Systems, Work Readiness.

Abstract

This study aims to describe the use of learning media in the learning process of Pancasila Education for tenth-grade senior high school students in Malang City and to determine students’ responses and participation toward the use of interactive PowerPoint (PPT) learning media. This study employed a qualitative approach with a descriptive research design. The research was conducted at SMA Laboratorium Universitas Negeri Malang involving tenth-grade students and a Pancasila Education teacher as research subjects. Data collection techniques included observation, documentation, questionnaires, and interviews. Data analysis used the Miles and Huberman model, consisting of data reduction, data presentation, and conclusion drawing. The results showed that the use of interactive PPT learning media had a positive impact on the Pancasila Education learning process. Students demonstrated positive responses because the learning media were considered attractive, easy to understand, and capable of increasing students’ focus and learning motivation. In addition, the use of interactive PPT media improved students’ participation in classroom activities, such as asking questions, answering questions, and engaging in classroom discussions. However, several obstacles were found, including excessive text in the PPT slides and technical problems with learning devices. Therefore, the development of more creative, interactive, and contextual learning media is needed to create a more effective and enjoyable learning process.

Downloads

Download data is not yet available.

References

Hidayat, R. (2021). Keamanan Siber dalam Sistem Otomasi Industri. Deepublish.

Nugroho, S. (2022). Cybersecurity dan IoT dalam Sistem Mekatronika Industri. ITB Press.

Sugiyono. (2020). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Alfabeta.

Xynexis International. (2025). Cybersecurity Education for Digital Workforce. Xynexis.

Badan Siber dan Sandi Negara. (2023). Laporan Tahunan Keamanan Siber Indonesia. Badan Siber dan Sandi Negara.

BINUS University. (2024). Kesiapan tenaga kerja di era revolusi industri 4.0.

Bridgenr. (2024). Otomasi industri. https://bridgenr.com/id/blog/otomasi-industri/

Direktorat Jenderal Pendidikan Vokasi. (2021). Kebijakan Pendidikan Vokasi di Era Digital. Kementerian Pendidikan, Kebudayaan, Riset, dan Teknologi.

Erizal, N. (2024). AI dan otomatisasi ubah lanskap pekerjaan di Indonesia. Kumparan

BM Security. (2022). IBM X-Force Threat Intelligence Index 2022.

Nexus Integra. (2023). 10 benefits of counting with an industrial automation system.

SQURA Cybersecurity. (2024). Apa itu cyber security & 5 kelebihannya yang wajib tahu

Anaam, I. K., Hidayat, T., Pranata, R. Y., Abdillah, H., & Putra, A. Y. W. (2022). Pengaruh trend otomasi dalam dunia manufaktur dan industri. Vocational Education National Seminar (VENS)

Anthony, A., Sediyono, E., & Iriani, A. (2020). Analisis kesiapan kerja mahasiswa di era Revolusi Industri 4.0 menggunakan Soft-System Methodology. Jurnal Teknologi Informasi dan Ilmu Komputer,

Anwar, M. (2021). Literasi digital dalam dunia kerja era Revolusi Industri 4.0. Jurnal Pendidikan Vokasi

Budi, E., Wira, D., & Infantono, A. (2021). Strategi penguatan cyber security guna mewujudkan keamanan nasional di era Society 5.0. Prosiding Seminar Nasional Sains Teknologi dan Inovasi Indonesia.

Dwi Saputro, Y., & Nugroho, S. (2023). Aplikasi PLC Siemens S7-1200 untuk sistem kontrol dan monitoring. Jurnal Teknik Elektro

Fajaruddin, M., & Wibowo, Y. (2021). Implementasi IIoT untuk pemeliharaan prediktif pada motor induksi. Jurnal Teknik Industri.

Fauzi, M., & Lestari, Y. (2020). Peran IoT dalam mewujudkan konsep smart factory di era Industri 4.0. Jurnal Teknik Komputer.

Fauziah, N., dkk. (2023). Analisis kebutuhan kompetensi cybersecurity pada kurikulum pendidikan vokasi era Industri 4.0. Jurnal Pendidikan Teknik Elektro.

Handayani, R. (2022). Etos kerja dan tantangan tenaga kerja di era digital. Jurnal Manajemen & Bisnis, 9(1), 67–78.

Handoko, E., & Purwanto, A. (2020). Perancangan sistem SCADA berbasis web untuk pengendalian level air. Jurnal Teknik Elektro.

Hoshmand, M. O., & Ratnawati, S. (2023). Analisis keamanan infrastruktur teknologi informasi dalam menghadapi ancaman cybersecurity. Jurnal Sains dan Teknologi, 5(2), 679–686.

Huzaifah, A. S. (2024). Peningkatan kompetensi mahasiswa di bidang network computer dan cyber security melalui program studi independen Merdeka Belajar Kampus Merdeka. Jurnal Pengabdian Bersama Masyarakat Indonesia, 2(3), 53–60.

Kurniasari, F. B. (2022). Perkembangan programmable logic controller (PLC) di era Industri 4.0. TATAL: Jurnal Teknik Industri dan Teknologi, 2(1).

Permana, R. A., Anindita, R., Zainol, Z., & Quinn, A. (2025). Analisis metode dan teknologi untuk perlindungan data dan informasi dari ancaman siber. Jurnal MENTARI: Manajemen, Pendidikan dan Teknologi Informasi, 3(2), 137–146.

Purwadi, S., & Kholiq, A. (2023). Pengembangan HMI dengan desain high performance untuk efisiensi operasional. Jurnal Otomasi Industri.

Rahmat, T., Ashshiddiqi, M. T., & Apriliani, D. (2024). Urgency of digital literacy to improving work readiness in the Industrial Revolution 4.0. The Journal of Society and Media, 8(1), 307–326. https://doi.org/10.26740/jsm.v8n1.p307-326

Ramadhani, A., & Susanto, W. (2024). Perancangan HMI multi-touch pada panel kontrol mesin produksi. Jurnal Rekayasa Otomasi.

Riyandhika, R. R. (2020). Analisis kesadaran cybersecurity pada kalangan mahasiswa di Indonesia. AUTOMATA, 1(2).

Rohman, M., Setiawan, R., & Lestari, A. (2022). Faktor-faktor yang memengaruhi kesiapan kerja siswa vokasi di Indonesia. Jurnal Pendidikan Teknologi dan Kejuruan, 28(3), 201–213.

Setiadi, A., & Santoso, B. (2022). Integrasi PLC dalam arsitektur IIoT untuk smart manufacturing. Jurnal Sistem dan Teknologi Informasi.

Setiawan, D. (2022). Studi implementasi cloud-based SCADA untuk infrastruktur distribusi air. Jurnal Sains dan Teknologi.

Suparno, S., Purwana, D., Wibowo, A., & Narmaditya, B. S. (2023). Industrial education 4.0: The role of human, technology, and data literacy. Journal of Media Literacy Education, 15(3), 27–40. https://doi.org/10.23860/JMLE-2023-15-3-3

Supriyanto, E. (2020). Peran soft skills dalam mendukung kompetensi kerja lulusan vokasi. Jurnal Psikologi dan Pendidikan, 14(1), 45–55.

Suriadi. (2022). Keamanan sistem informasi dan serangan siber di Industri 4.0. Jurnal Teknologi Informasi, 5(1), 12–25.

Telaumbanua, A., & Telaumbanua, A. (2024). Pengaruh soft skill dan hard skill mahasiswa terhadap kesiapan kerja di era Revolusi Industri 4.0. Jurnal Suluh Pendidikan, 12(2), 126–136.

Wibowo, A. (2021). Penguasaan keterampilan teknis sebagai penentu kesiapan kerja lulusan SMK. Jurnal Teknik dan Kejuruan

Downloads

Published

2026-07-30