STUDI KARAKTERISTIK ELEKTRIK MODUL PIEZOELEKTRIK TERHADAP VARIASI BEBAN RESISTIF SEBAGAI SUMBER ENERGI ALTERNATIF TERBARUKAN
DOI:
https://doi.org/10.23969/jp.v11i02.48760Keywords:
Piezoelectric, Resistive Load, Energy Harvesting, Renewable EnergyAbstract
Mechanical energy harvesting from human footsteps is a potential solution for supplying micro-power to autonomous electronic devices. This study aims to investigate the electrical characteristics of PZT (Lead Zirconate Titanate) piezoelectric modules arranged in a parallel configuration of 20 units to respond to a mechanical load of 100 kg. The main focus of this research is to analyze the effect of low resistive load variations from 10 Ω to 110 Ω on power transfer efficiency. The experimental method was carried out by applying a static load of 100 kg to the piezoelectric array connected to a full-bridge rectifier circuit using 1N4007 diodes and a 47 µF filter capacitor. The output voltage was then measured across six variations of resistive loads using a digital multimeter, with three repetitions at each measurement point to ensure data validity. The results show that increasing the load resistance is directly proportional to the increase in output voltage, but inversely proportional to the generated current. The Maximum Power Point (MPP) was identified at a resistive load of 90 Ω with a power output of 33.64 mW. This phenomenon demonstrates that the parallel configuration of the piezoelectric array effectively reduces the internal impedance of the system, allowing optimal energy transfer within a low-load range.
Downloads
References
Ali, W. G., & Ibrahim, S. W. (2012). Power analysis for piezoelectric energy harvester. Energy and Power Engineering, 4(6), 496–505.
Demouron, Q., Morel, A., Gibus, D., Benhemou, A., & Badel, A. (2022). Resistive load influence on the power and bandwidth of bistable energy harvesters. In Proceedings of the 7th Forum on Research and Technologies for Society and Industry Innovation (RTSI 2022) (pp. 198–203). IEEE.
Ekawita, R., Salam, R. A., Kusumawardani, N., & Yuliza, E. (2021). Pengujian konfigurasi piezoelektrik penghasil tegangan listrik dari energi mekanik. Journal of Physics (JoP), 6(2), 1–6.
Kallawa, A. F., Fikri, A., & Mujirudin, M. (2022). Pengaruh rangkaian seri dan paralel terhadap tegangan pada piezoelektrik. Metalik: Jurnal Manufaktur, Energi, Material Teknik, 1(2), 52–57.
Kiswantono, A., & Irwan, A. (2024). Inovasi energi hijau: Piezoelektrik untuk mengubah getaran kendaraan menjadi listrik. JITET (Jurnal Informatika dan Teknik Elektro Terapan), 12(3), 1829–1835.
Lien, I. C., Lo, Y. C., Chiu, S. H., & Shu, Y. C. (2022). Comparison between overall and respective electrical rectifications in array of piezoelectric energy harvesting. Journal of Mechanics, 38, 518–530.
Miandoab, E. M., Jafari, A. H., & Valipour, A. (2021). Design of piezoelectric tile for energy harvesting: Experimental approach. Journal of Materials and Applications, 10(2), 83–89.
Mou, K., Jia, X., Liu, J., Zhou, H., Tian, H., Li, X., & Liu, H. (2025). Using piezoelectric technology to harvest energy from pavement: A review. Journal of Traffic and Transportation Engineering (English Edition), 12(1), 68–86.
Rajapaksha, R. M. A. D., Senevirathne, P. K. V. M., & Fernando, M. N. V. (2025). Design and optimization of piezoelectric energy harvesting systems for efficient power generation in smart pavements: A review. Journal of Research Technology and Engineering, 6(2), 95–103.
Romadhona, A., Setiadi, H., & Muhammad, S. K. (2025). Implementasi konsep piezoelectric sebagai energi alternatif di jalur pedestrian Situs Kota Lama Semarang. Jurnal Penataan Ruang, 20(1), 24–36.
Valemtina, M. A., Silalahi, E. M., & Widodo, B. (2025). Perancangan prototype pembangkit piezoelektrik lantai untuk suplai energi listrik lampu penerangan pintu masuk rumah. JITET (Jurnal Informatika dan Teknik Elektro Terapan), 13(1), 1475–1485.
Zhu, M., Worthington, E., & Njuguna, J. (n.d.). Analyses of power output of piezoelectric energy harvesting devices directly connected to a resistive load using a coupled piezoelectric-circuit finite element method. Cranfield University Research Report.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Pendas : Jurnal Ilmiah Pendidikan Dasar
This work is licensed under a Creative Commons Attribution 4.0 International License.
